Skip to main content
All Posts By

adrian@VTA

New Year, New Updates

By Uncategorized

Happy 2019!

I’ve been very behind posting the recently completed jobs. I thought I’d do a few in this post.

I have a few new videos up on the youtube channel as well worth checking out.

  1. 6138-0040 “SpeedTimer” JDM model. This was was a real mess and had some poor work done previously on the hands and dial. That was cleaned up and it’s now a great timekeeper –

2. SEIKO 7017-6020 “SpeedTimer” JDM Model. This watch was a full service plus restoration work on the hands, which had chipped paint and the luminous markers.

3. SEIKO 6105-8110 Diver. This watch got a full rebuild, the premium jewel upgrade and a re-lume. The original lume was completely mouldy. Also the bezel pip was repaired

4. A nice pair…7T59-6A00 and 6139-6002. The 7T59 received a hand restoration, new seals and glass. The 6139 got a full rebuild with the standard barrel arbor jewel upgrade.

5. SEIKO Sportsmatic SILVERWAVE (603 Movement). This watch got a full service, new crystal and the bezel pip repaired.\

 crystal

6. Another pair, SEIKO 6119-6023 and Bell-Matic. The 6119 got a new crystal and full service with jewel upgrade. The Bell-Matic was a full service, replacement crystal as well as re-plating of the bracelet and case.

7. CASIO DATABANK. Built from parts. Not my usual thing, but I had a bag full of NOS parts and there were enough there to make one of these. I did always want one as a kid.

8. 6309-7040 Diver. This watch was fully serviced, barrel arbor repaired, new glass, new seals and new hands. The original hands were pretty mouldy.

9. SEIKO Bell-Matic 4006-6020 Brown. This watch had a hard life and some terrible work done on it previously. It was serviced, got a new crystal, seals, the original sweep hand colour restored and some parts replaced inside. Runs pretty good now.

10. SEIKO 6139-6000. This watch was fully serviced, arbor jewels added and the hands/dial re-lumed.

11. Last one for today. My SEIKO 6119-6400. This watch was fully serviced, barrel arbor jewels added and a new crystal installed. It is also up for sale.

NEW – Premium Upgrade Service for your SEIKO 6105 Diver!

By Uncategorized

Geday People,

We’ve now introduced a new premium service for the 6105 diver movements.

Originally these were a 17 jewel movement, which means some compromises were made to reduce the jewel count.

Over many service jobs we often find the brass bushes installed in the top movement plate are worn significantly and affect the running of the watch. Often they cause intermittent stoppages and accuracy issues.

Our new premium 6105 service replaces the barrel arbor jewel bearings and the top movement plate jewel bearings. This increases the jewel count of the movement to 21 jewels and means the entire movement is fully jeweled. Overall this is a huge improvement for the movement and should extend the life of the movement indefinitely.

The best part is the modifications are not visible unless the movement is taken apart, meaning it will not affect the originality of your watch.

This upgrade is in addition to our standard Viton crown seal upgrade, which means the watch will pass a 100m pressure test again and operate as per original specs. Our pressure tests are done on a Swiss WITSCHI electronic dry pressure tester which guarantees accuracy.

Want to know more? Ask away on the contact page.

Here’s what is changed in the upgrade –

Not Dead!

By Uncategorized

Geday,

I’m not dead. For the past few days I’ve had a major website outage with some serious technical difficulties which have now been resolved. If you’ve tried to get in touch, try again and the email will come through. Thanks! – Adrian

Job Complete – SEIKO 6139-6002 Blue Dial

By Uncategorized

This would have to be the most common service job, 6139 chronograph.

This example was particularly nice, basically just nice all round. I was having a bad day with lighting so you can’t see the applied SEIKO logo on the dial.

Only a straightforward service, barrel arbor jeweling and seal replacement was required.

Job Complete – SEIKO A229-5060 LCD

By Uncategorized

I don’t see a lot of LCD style watches overall, most of them are fried by battery leaks or other issues that kill these watches.

This one got a full set of seals, NOS crystal, new battery and general clean up. It must have always had quality batteries installed as there was no sign of battery leaks but had water intrusion due to failed seals. Despite having a water resistance rating of 150 meters, they were never really better than splash proof due to the number of possible entry locations for water.

Job Complete – SEIKO 7019-6040 “SPORTS”

By Uncategorized

I just finished this job. It’s a really cool 7019 SPORTS from 1971. I’ve never seen one of these before, ever so it a very uncommon model. The watch got a total rebuild, some parts replaced in the keyless works, new seals, finish restoration on the case and some bracelet repair.

And on the wrist –